The cable and connector set is tailor-made for each type of engine (for an example see Fig. 3.6) and contains cables in the correct length, provided with the necessary plug-in connections as well as all seals, O-rings and small articles for the assembly.
SiCOMS® performs compartment specific oil mist monitoring and lubrication oil temperature measurements. The measuring unit of SiCOMS® for a compartment consists of a finger-shaped optical sensor with system redundancy, and a multiple chamber Splash Oil Guard (SOG) which prevents the sensor from being soiled with splash oil, but allows the oil mist and water vapour to enter the sensor light
for non intrinsically safe electric circuits rated voltage for power supply DC 24V, Um = DC 30V rated voltage for RS 485 interface DC 24V, Um = DC 30V optical radiation wavelength 880 nm optical power of LED P0 < 12 mW radiant intensity of LED < 0,6 mW/mm2 Environment
In this chapter we will give you an overview of the main technical data, ordering options and a brief block-wiring diagram. For a detailed pin layout and technical drawings, please refer to Chapter 12 Appendix. Power Supply: 24V DC +30/-25% Operating Current: max. 3.0 A Up to 16 (sixteen) SiCOMS® sensors can be connected Sensitivity: Adjustable in 10 steps from
The main components of a SiCOMS® system are: • 1…..16 sensors SiSe/OC xx-xx• 1…..16 SOG (Splash Oil Guard) Fig. 1.1 SiCOMS® sensor SiSe/OC20-68 incl. SOG (Splash Oil Guard)and Diffusor • SiCOMS® EvaluatorServes as a local control and for evaluation and display of all values. It can transmit all data via RS485 interface to a computer running the SiCOMS® Data_Logger software
EMC-Directives 2014/30/EU (Diesel- and -Version) ATEX- Directives 2014/34/EU (-Version only) Manufacturer motcom® GmbHKurt-Schumacher-Str. 28-30D – 66130 Saarbrücken / GermanyPhone +49 681 8837904-0Fax: +49 681 8837904-19 We declare on our own responsibility, that the products Product description SiCOMS®Single Compartment Oil Mist Online Monitoring System Type designations SiCOMS®SiCOMS® Ex only with sensors type SiSe/OC**EX are in compliance with following norms: Diesel- and
The Evaluator (Fig.3.5) consists of a IP66 compliant, shock resistant metallic case, a LCD, three LEDs (Shut-down, Pre-Alarm, System Ready), four control keys and one reset button . The Evaluator can be operated between 0°C to 70°C and 0-80% relative humidity, suitable for installation close to the engine. It displays all measurement values and parameters and is used for diagnostics
