SiCOMS® – Sensor temperature in degree C
Menu level 1 Menu level 2 Menu level 3 Description Sensor temperature in degree C The bargraph displays sensor temperature in °C.
Troubleshooting
SiCOMS® – Opacity relative to Alarm in %
Menu level 1 Menu level 2 Menu level 3 Description Opacity relative to Alarm in % The bargraph shows opacity relative to alarm in %.Displays some measured sensor valuesgraphically in a bar diagram.Each sensor from 1 to 16 is represented by anempty bar, the values for connected sensors are displayed as the contents
SiCOMS® – Graphic display
Menu level 1 Menu level 2 Menu level 3 Description Displays some measured sensor valuesgraphically in a bar diagram. Each sensor from1 to 16 is represented by an empty bar, thevalues for connected sensors are displayed asthe contents filling the corresponding bars.
SiCOMS® – Detailed values for the 1st sensor
Menu level 1 Menu level 2 Menu level 3 Description Values sensor 1 Values sensor 2 Detailed values for the selected sensor Displays measured values and status for aselected OMD sensor: Values sensor 1:Number of sensor, here 1. Range of possible values: 1 to 16Id:Sensor identifier Oilmist Concen. mg/l:Oil mist concentration in mg/l Opacity:Opacity
SiCOMS® – Sensor values
Menu level 1 Menu level 2 Menu level 3 Description Detailed values for the selected sensor 1….16
SiCOMS® – COT temperature deviation
Menu level 1 Menu level 2 Menu level 3 Description COT temperature deviations COT temperature deviation from the average temperature for each connected sensor is displayed in the same form as described in 4.4.1
SiCOMS® – COT measured temperature
Menu level 1 Menu level 2 Menu level 3 Description COT measured temperatur COT measured temperatures are displayed here in a table: [value for S1] [value for S2] [value for S3] [value for S4] [value for S5] ………………[value for S16] where [value for Sn] is the current temperature value at sensor n in °C or a
SiCOMS® – COT temperature
Menu level 1 Menu level 2 Menu level 3 Description Depending on sensor mounting positionthe OMD system can measure crankpin oiltemperature, COT
SiCOMS® – System measured values (default screen)
Menu level 1 Menu level 2 Menu level 3 Description Default screen The screen shows system average values for all connected OMD sensors:– Opacity in percent – Oil mist concentration in mg/l – Temperature in C° If the “COT TD measure ena.” option in menu xxx is
SiCOMS® – System measured values (default screen) Read More »
SiCOMS® – Menu Structure
With this menu structure we want to give a complete overview of the levels, followed by explanations and tables on the next pages. Note: – The numerical indexes correspond to the chapter numbers from this User Manual.** – n is the number of connected sensors